Pentax Optio E20 User Manual

EN-60
5. Select "CD-ROM drive" and "Specify a location" as shown on the
right. Click on "Next".
Follow the on-screen instructions to complete the installation.
6. After the USB driver has been installed, restart your computer.
 About Windows ME/2000/XP and Mac OS 9.2 or higher
For Windows ME/2000/XP and Mac OS 9.2 or higher, the computer
will automatically recognize the digital camera and load its own USB
drivers.
Step 2: Connect the digital camera to your computer
1. Rotate the mode dial to and turn your camera on by pressing
the power switch.
2. Press the four-way controller (X) to select the [Set-up2] menu,
then use the four-way controller (T) to select [USB Con.].
3. Press the button.
4. Use the four-way controller (T) to select [PC], then press the
button.
5. Turn off your camera.
Set-up1
Set-up1
Set-up2
Set-up2
Set-up3
Set-up3
USB Con.
USB Con.
Video Out
Video Out
Brightness
Brightness
Auto Power Off
Auto Power Off
USB Con.
Video Out
Brightness
Auto Power Off
PC
PC
PAL
PAL
2min.
2min.
PC
PAL
2min.
Select :
Select :
Set-up1 Set-up2 Set-up3
Select :
USB Connection
USB Connection
USB Connection
PC
PC
PictBridge
PictBridge
PC
PictBridge
Select :
Select :
Cancel :
Cancel :
Select :Cancel :

Pentax Optio E20 Specifications

General

Brand	Pentax
Model	Optio E20
Category	Digital Camera
Language	English