EN-35
Drive Mode
High Speed Continuous
This mode is used for continuous shooting. Three pictures are taken continuously once the shutter release
button is pressed. Secure the camera to a tripod or place it on a stable surface.
1. Rotate the mode dial to , , , , or .
2. Press the power switch to turn on the power.
3. Press the four-way controller (S/ ) and use (S) to select [High
Speed Continuous]. You can also change the setting using
four-way controller (WX).
4. Press the button to confirm the setting. The indicator is
displayed on the LCD monitor.
5. Press the shutter release button halfway to lock the focus.
6. Press the shutter release button to capture a sequence of three
images.
In High Speed Continuous mode, the flash mode will be set to Flash Off automatically.
The interval will vary according to the Recorded Pixels and Quality Level settings.
The focus, exposure and white balance are locked with the first image.
OK :
OK :
Drive Mode
High Speed Continous
Drive Mode
High Speed Continous
To Next Page
Loading...
Need help?
General
