Pentax Optio E30 - Powering the Camera; Installing the Batteries

20
1
Getting Started
Powering the Camera
Install the batteries into the camera. Use two AA alkaline, AA lithium, AA
Ni-MH, or AA nickel manganese batteries.
1 Open the battery/card cover.
Pull the battery/card cover in the direction of 1 and flip the cover open
in the direction of 2.
2 Insert the batteries, making sure the (+) and (–) on the
batteries match the (+) and (–) inside the battery
compartment.
3 Close the battery/card cover and slide it back into
place.
Installing the Batteries
1
2