59
4
Taking Pictures
Y
In
Y
(Frame Composite mode), you can take pictures using the frames
stored in the camera. There are three frames already stored in the
camera.
1 Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2 Use the four-way controller (2345) to select Y
(Frame Composite).
3 Press the 4 button.
The selected frame appears in single-image
display. You can choose another frame
using the four-way controller (45).
4 Press the 4 button.
The frame appears on the screen.
5 Press the shutter release button
halfway.
The focus frame on the LCD monitor turns green if the subject is in
focus.
6 Press the shutter release button fully.
The picture is taken.
Framing Your Pictures (Frame Composite Mode)
• The number of recorded pixels is fixed at h and the quality level
at D.
• The continuous shooting function is not available in Y mode.
7, 8
1, 2, 4
3, 5, 6
MENU
OK
OK
OK
To Next Page
Loading...
