55
4
Taking Pictures
Taking Pictures
Taking Pictures
R
In R (Program mode), the camera automatically sets the shutter speed
and aperture for taking still pictures. However, you can select other
functions such as the flash mode and recorded pixels.
1 Press the power switch.
The camera turns on and is ready to take still pictures.
2 Set the functions you want to use.
Refer to “Setting the Shooting Functions”
(p.68 - p.82) for details of how to set the
functions.
3 Press the shutter release button
halfway.
The focus frame on the LCD monitor turns
green if the subject is in focus.
4 Press the shutter release button fully.
The picture is taken.
Letting the Camera Choose the Optimal Settings
(Program Mode)
If a shooting mode other than R mode has been selected, select
R mode from the Capture Mode Palette. (p.49)
Taking Still Pictures 1p.36
3, 4
1
03/03/2007
38
14:25
To Next Page
Loading...
