75
4
Taking Pictures
R C Y
You can take pictures in natural colors by adjusting the white balance
according to the light conditions at the time of shooting.
White Balance
1 Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (
23
) to select [White Balance].
3 Press the four-way controller (5).
The White Balance screen appears.
4 Use the four-way controller (23)
to change the setting.
5 Press the 4 button.
The White Balance setting is saved.
6 Press the 3 button.
The camera returns to capture status with the current setting.
Refer to “Manual Setting” (p.76) for instructions on adjusting the white
balance manually.
Adjusting the White Balance
F
Auto The camera adjusts the white balance automatically.
G
Daylight Use this mode when taking pictures outside in sunlight.
H
Shade
Use this mode when taking pictures outside in the shade.
I
Tungsten Light
Use this mode when taking pictures under electric or other
tungsten light.
J
Fluores. Light
Use this mode when taking pictures under fluorescent light.
K
Manual Use this mode when adjusting the white balance manually.
Saving the White Balance 1p.84
MENU
Rec. Mode
MENU
Exit
Exit
1/3
7
M
Recorded Pixels
Quality Level
White Balance
Focusing Area
Sensitivity
AWB
ISO
AUTO
1, 6
2, 3, 4
5
MENU
White Balance
Auto
Auto
Cancel
Cancel
OK
OK
OK
To Next Page
Loading...
Need help?
General
Weight and Dimensions
