35
1
Getting Started
9 Press the 4 button.
The camera returns to capture status.
Language, Date and Time can be changed. Refer to the pages below for
instructions.
• To change the language, follow the steps in “Changing the Display
Language” (1p.132).
• To change the date and time, follow the steps in “Changing the Date
and Time” (1p.130).
When the 3 button is pressed in the Language/ screen,
the selected language is canceled and the Date Adjustment screen
is displayed in the default language (English). To set to another
language, follow the steps on p. 35.
When the 3 button is pressed in the Date Adjustment screen,
the camera enters Shooting mode without setting the date and time.
Restart the camera to set the date or time. The Date Adjust screen
reappears. Alternatively, you can display the Date Adjustment
screen from the [u Setting] menu. (
1p.132)
If you press the 4 button in Step 9, the camera clock is reset to 00
seconds. To set the exact time, press the 4 button when the time
signal (on the TV, radio, etc.) reaches 00 seconds.
The video output format (NTSC/PAL) is automatically set according to the
language selected in [Language/ ] on the Initial Setting screen (refer to the
table below). You can change the setting. (p.135)
Language
Video
Out
Language
Video
Out
NTSC (Dutch) PAL
(French) PAL (Russian) PAL
(German) PAL (Korean) NTSC
(Spanish) PAL (traditional Chinese) PAL
(Portuguese) PAL (simplified Chinese) PAL
(Italian) PAL (Japanese) NTSC
(Swedish) PAL
To Next Page
Loading...
