150
8
Settings
Choose the appropriate USB connection depending on whether you are
going to connect the USB/AV cable to a computer or a PictBridge-
compatible printer.
1 Use the four-way controller (23) to select [USB
Connection] on the [R Setting] menu.
2 Press the four-way controller (5).
A pull-down menu appears.
3 Use the four-way controller (23)
to select [PC] or [PictBridge].
[PC] : Select this option when
transferring image data to a
computer
[PictBridge] : Select this option when
connecting the camera to a
PictBridge-compatible printer
4 Press the 4 button.
The USB Connection setting is saved.
Changing the USB Connection Mode
For instructions on connecting the camera to a computer, refer to the
PC Connection Manual contained in the CD-ROM that contains this
Operating Manual.
Do not connect the camera to your computer while [PictBridge] is
selected for the [USB Connection]. Also, do not connect the camera
to your printer while [PC] is selected.
How to display the [R Setting] menu
MENU
Setting
MENU
1/2
Format
Sound
Date Adjust
World Time
Language/
Folder Name
Exit
05/05/2008
English
Date
3 button
4 button
Four-way controller
Setting
2/2
MENU
Cancel
OK
OK
USB Connection
Video Out
Brightness Level
Power Saving
Auto Power Off
Reset
NTSC
5sec
3min
PC
PictBridge
To Next Page
Loading...
Need help?
General
