Pentax Optio E60 - Letting the Camera Choose the Optimal Settings (Program Mode)

57
4
Taking Pictures
Available in R
In R (Program), the camera automatically sets the shutter speed and
aperture for taking still pictures. You can select other functions such as
the flash mode and recorded pixels.
1 Press the four-way controller (3) in the capture mode.
The Capture Mode Palette appears.
2 Use the four-way controller (2345) to select R.
3 Press the 4 button.
The shooting mode is selected and the camera returns to capture
status.
4 Set the functions you want to use.
5 Press the shutter release button
halfway.
The focus frame on the display turns green
if the subject is in focus.
6 Press the shutter release button
fully.
The picture is taken.
Letting the Camera Choose the Optimal Settings
(Program Mode)
Four-way controller
4 button
Shutter release button
0 5 / 0 5 / 20 0 8
05/05/2008
38
3 8
38
1 4 : 2 5
14:25