11 Camera Setup
Inserting an SD/SDHC Memory Card
English
Inserting an SD/SDHC Memory Card
The camera features Approx. 20 MB internal flash memory but you may also use an optional SD/SDHC
memory card for additional storage.
Follow these instructions to insert the SD/SDHC card.
1. Open the battery compartment on the bottom of
the camera.
2. Insert the SD/SDHC card into the memory card
slot as shown. (Label side up)
3. Close the battery compartment.
To remove the SD/SDHC card, gently push the card until it pops out.
Pull out the card carefully.
Note:
• Format memory cards via CAMERA before first use, and be sure to reformat all memory cards after
using them in a computer or other device. For more information on formatting memory cards, see
page 46.
• If remove or insert SD card when power on, the camera will tune off automatically.
Downloaded from ManualsCamera.com Manuals
To Next Page
Loading...
