Getting Started 14
Taking Photos
English
Getting Started
Now that you are familiar with the layout of your camera, you are ready to start taking photos and
movies.
Taking Photos
Taking a photo with the camera is very simple.
Turn the camera on and press the SCENE button to access the Auto mode.
1. Frame the shot on the LCD screen and press the Shutter button halfway. The camera automatically
adjusts the focus and exposure. The AF Frame turns green when ready.
2. Press fully and hold the Shutter button to capture the image.
When a camera steady warning icon appears, hold the camera as still as possible, as a longer
exposure time is required.
Anti-Shake Function
This function is available in Auto mode. Press the OK button to
enable the Anti-Shake function, and press again to disable it.
An Anti-Shake icon displays on the LCD screen when the function
is activated.
Using Macro Mode
Macro mode is designed for close-up photography and can capture all detail even when your subject is
very close to the camera. Press the Left/Macro navigation button. The Macro icon displays on
the LCD screen.
Downloaded from ManualsCamera.com Manuals
To Next Page
Loading...
