Pentax Optio P70 - Setting the Image Sharpness (Sharpness); Setting the Color Saturation (Saturation)

114
3
Taking Pictures
You can give the image sharp or soft outlines.
1 Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2 Use the four-way controller (23) to select [Sharpness].
3 Use the four-way controller (45)
to change the sharpness level.
F Soft
G Normal
H Sharp
4 Press the 3 button.
The setting is saved and the camera returns to capture status.
You can set the color saturation.
1 Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2 Use the four-way controller (23) to select [Saturation].
Instant Review 1p.67
If the Blink Detection function worked when shooting, [Closed eyes have
been detected.] is displayed for 3 seconds during Instant Review.
Setting the Image Sharpness (Sharpness)
If you change the [Sharpness] setting frequently, you can save time by
assigning it to the Green button (p.117).
Setting the Color Saturation (Saturation)
Rec. Mode
Saturation
Vertical Snap
Date Imprint
Off
MENU
Exit
3/3
Sharpness
Contrast
Green Button