Pentax Optio P70 - Default Settings

229
9
Appendix
Default Settings
The table below lists the factory default settings.
The meaning of the indications for menu items with a default setting is
explained below.
Last Memory Setting
Yes : The current setting (last memory) is saved when the camera is
turned off.
No : The setting returns to the default setting when the camera is
turned off.
* : The setting depends on the [Memory] setting (p.123).
—:N/A
Reset Setting
Yes : The setting returns to the default setting with the Reset
function (p.198).
No : The setting is saved even after reset.
—:N/A
[A Rec. Mode] Menu Items
Item Default Setting
Last Memory
Setting
Reset
Setting
Page
Pixel Track SR Auto Yes Yes p.112
Recorded Pixels E (4000×3000) Yes Yes p.104
White Balance F (Auto) * Yes p.107
Focusing Area J (Multiple) Yes Yes p.103
AE Metering L (Multi-segment) * Yes p.109
Sensitivity Auto * Yes p.110
EV Compensation ±0.0 * Yes p.106
Movie
Recorded Pixels F (1280×720/15 fps) Yes Yes p.121
Movie SR O (On) Yes Yes p.122
Blink Detection O (On) Yes Yes p.111
Digital Zoom O (On) * Yes p.77
Instant Review 1 sec. Yes Yes p.113