172
5
Editing and Printing Images
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to select [PictBridge].
5
Press the 4 button.
The setting is saved.
1
Turn off the camera.
2
Connect the camera to the printer using the USB cable.
3
Turn on the printer.
4
When the printer is ready to print, turn the camera on.
The printing mode selection screen
appears.
Go to the following pages.
“Printing Single Images” (p.173)
“Printing All Images” (p.175)
“Printing Using the DPOF Settings”
(p.176)
Do not connect the camera to your printer while [PC] is selected for the
USB Connection mode.
Connecting the Camera to the Printer
Setting
1/3
MENU
Cancel
OK
OK
PC
PictBridge
Sound
Date Adjust
World Time
Folder Name
USB Connection
02/02/2009
English
Single Image
S e l e c t p r i n t i n g m o d e
Select printing mode
All Images
DPOF AUTOPRINT
OK
OK
OK
To Next Page
Loading...
