Pentax Optio P70 - Editing Movies

164
5
Editing and Printing Images
The frames downloaded from the PENTAX website or other source can
be used for adding a frame to pictures.
You can select a frame from the recorded movie to save as a still picture
or divide a movie into two.
1 Enter the Q mode and use the four-way controller
(45) to choose the movie you want to edit.
2 Press the four-way controller (3).
The Playback Mode Palette appears.
3 Use the four-way controller
(2345) to select [ (Movie
Edit).
4 Press the 4 button.
The movie edit selection screen appears.
You can proceed to the following steps.
To Use a New Frame
• Extract the downloaded frame and copy it to the FRAME folder in the
built-in memory or the SD Memory Card.
• The FRAME folder is created when the SD Memory Card is formatted
with this camera.
• For more information on downloading, refer to the PENTAX website.
Editing Movies
Movie Edit
Movie Edit
For cutting out a still
image from a movie or
dividing a movie.
1 / 2
1/2
OK
OK
OK
MENU
Cancel
Cancel
OK
O K
OK
Save as Still Image
D i v i d e M o v i e s
Divide Movies
C a n c e l
Cancel