47
1
Getting Started
When the [Initial Setting] or [Date Adjust] screen is displayed, you can
cancel the setting operation and switch to the capture mode by pressing
the 3 button. In this case, the [Initial Setting] screen will appear
next time you turn the camera on.
[Language/ ], [Date], [Time], [Hometown], [DST], and [Vertical Snap] can be
changed. Refer to the pages below for instructions.
• To change the language, follow the steps in “Changing the Display Language”
(1p.191).
• To change the date and time, follow the steps in “Changing the Date and
Time” (1p.186).
• To change the city or turn DST on and off, follow the steps in “Setting the
World Time” (1p.189).
• To change the Vertical Snap setting, follow the steps in “To Select Vertical
Snap Setting” (1p.80).
To Next Page
Loading...
