Pentax Optio W30 - Using the Power Saving Function

178
8
Settings
You can save battery power by setting the LCD monitor to turn off
automatically when no operation is performed for a fixed time. After the
power saving function has been activated, you can turn the LCD monitor
on again by pressing any of the buttons.
1 Use the four-way controller (23) to select [Power
Saving] on the [H Setting] menu.
2 Press the four-way controller (5).
A pull-down menu appears.
3 Use the four-way controller (23)
to select [2min], [1min], [30sec],
[15sec], [5sec] or [Off].
4 Press the 4 button.
The Power Saving setting is saved.
Using the Power Saving Function
Power Saving does not function in the following situations:
• while recording sound in Voice Recording mode
• while taking pictures in Continuous Shooting mode or HS
Cont.Shooting mode
• in Playback mode
• while the camera is connected to a PC or printer
• when using the AC adapter
• while recording a movie
• while the menu is being displayed
Format
Sound
01/01/2007
Date Adjust
Alarm
World Time
Setting
MENU
Exit
E x i t
Exit
1/4
MENU
How to display the [u Setting] menu
Four-way controller
3 button
4 button
Setting
Power Saving
Auto Power Off
Quick Zoom
Green Button
Guide Display
2min
Off
5sec
15sec
30sec
1min
3/4
MENU
Cancel
C a n c e l
OK
O K
Cancel
OK
OK