Pentax Optio W30 - Setting the Functions (Program Mode)

63
4
Taking Pictures
R
In R (Program mode), the camera automatically sets the shutter speed
and aperture for taking still pictures. However, you can select other
functions such as the flash mode and recorded pixels.
1 Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2 Use the four-way controller (2345) to select R
(Program mode).
3 Press the 4 button.
4 Set the functions you want to use.
Refer to “Setting the Shooting Functions”
(p.85 - p.103) for details of how to set the
functions.
5 Press the shutter release button
halfway.
The focus frame on the LCD monitor turns
green if the subject is in focus.
6 Press the shutter release button fully.
The picture is taken.
Setting The Functions (Program Mode)
If a shooting mode other than R mode has been selected, select
R mode from the Capture Mode Palette. (p.53)
Taking Still Pictures 1p.40
1
3, 4
38
3 8
38
14:25
1 4 : 2 5
14:25
01/01/2007
0 1 / 0 1 / 2 0 0 7
01/01/2007