Pentax Optio W30 - Default Settings

186
9
Appendix
Default Settings
The table below lists the factory default settings.
The meaning of the indications for menu items with a default setting is
explained below.
Last Memory Setting
Yes : The current setting (last memory) is saved when the camera is turned off.
No : The setting returns to the default setting when the camera is turned off.
* : The setting depends on the [Memory] setting (p.104).
Reset Setting
Yes : The setting returns to the default setting with the Reset
function (p.182).
No : The setting is saved even after reset.
[A Rec.Mode] Menu Items
Item Default Setting
Last Memory
Setting
Reset
Setting
Page
Recorded Pixels 6 (3072×2304) Yes Yes p.89
Quality Level D (Better) Yes Yes p.91
White Balance F (Auto) * Yes p.92
AE Metering L (Multi-segment) * Yes p.94
Sensitivity Auto (64-400) * Yes p.96
EV Compensation ±0.0 * Yes p.82
AF
Setting
Focusing Area J (Multiple) Yes Yes p.98
Focus Limiter O (On) Yes Yes p.99
Movie
Recorded Pixels m (640×480) Yes Yes p.108
Quality Level C (Best) Yes Yes p.109
Frame Rate 30fps Yes Yes p.110
Color Mode Full Color Yes Yes p.111
Movie SR O (On) Yes Yes p.112
Interval Shoot
Interval 1 min Yes Yes p.113
Total
Time
10 min Yes Yes p.113
Start
Delay
In 0 hr 0 min Yes Yes p.113
AF w/ recording P (Off) Yes Yes p.116
Optical Zoom P (Off) Yes Yes p.117
Interval
Shoot
Interval 10 sec Yes Yes p.78
Number of Shot 2 pictures Yes Yes p.78
Start Delay In 0 hr 0 min Yes Yes p.78