23
1
Getting Started
Use the battery that is provided with the camera. Charge the battery
before using it in the camera for the first time.
1
Open the battery/card cover.
While pressing the battery cover lock lever in the direction of 1, slide
the battery/card cover in the direction of 2 and flip the cover open in
the direction of 3.
2
Using the side of the battery to press the battery lock lever
in the direction of
4
, insert the battery with the side with
the PENTAX logo pointing toward the back of the camera.
Push the battery in until it is locked in place.
3
Close the battery/card cover.
Slide the battery/card cover in the opposite direction of 2, and push it
in until it clicks to ensure it is securely locked.
1
Open the battery/card cover.
2
Release the battery by using your finger to press the
battery lock lever in the direction of
4
.
The battery will be ejected. Pull the battery out of the camera.
Installing the Battery
Removing the Battery
•
Do not apply excessive pressure to the front or back of the camera
when opening and closing the battery/card cover as this may dislodge
the waterproof packing. If the packing is not in the correct position, the
waterproof performance of the camera will be compromised.
•
If the battery/card cover is not locked securely when you close it,
water, sand, or dirt may enter the camera.
2
1
Battery cover lock lever
Battery
lock lever
To Next Page
Loading...
Need help?
General
