In Self-timer mode, the picture is taken ten seconds or two seconds after
the shutter release button is pressed.
Stabilize the camera with a tripod or other support when taking a picture
with the self-timer.
Use this mode when you want to be included in a group picture. The picture
is taken approximately ten seconds after the shutter release button is pressed.
• Use this mode to avoid camera shake. The picture is taken approximately two
_s seconds after the shutter release button is pressed.
Shutter release
button
Four-way controller
OK button
1' Press the four-way controller (A) in a mode.
The [Drive Mode] screen appears.
2 Use the four-way controller (< I_ ) to select ® and press
the four-way controller (•).
3 Use the four-way controller
(• I_) to select ® or 6_ and
press the OK button.
The camera is ready to take the
picture using the self-timer.
When the camera detects a person's
face, the Face Detection function is
activated and the face detection frame appears (p.80).
4
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
To Next Page
Loading...
