InIoq (Frame Composite) mode, you can take pictures using the frames
stored in the camera.
Shutter release button
[]/0, button
Four-way controller
OK button
1' Press the four-way controller (v) in a mode.
The Capture Mode Palette appears.
2 Use the four-way controller (• • < _ ) to select
(Frame Composite).
3 Press the OK button.
The 12-frame display of the frame selection screen appears.
4
Use the four-way controller
(• • • _ ) to choose the frame
you want to use.
5 Press the (_, button.
The selected frame appears in single-image display.
You can choose another frame using either of the following operations.
Four-way controller ( • • ) Press to choose a different frame.
Zoom button ([]) Press to return to the 12-frame display of the frame
selection screen, and then perform step 4 to
choose a different frame.
To Next Page
Loading...
Need help?
General
