You can use the zoom to change the captured area.
$$$/$ button
MENU button
Four-way controller
OK button
1 Press the $$$/$ button in a Zoomratio
mode. Zoom bar
$_$ Wide (left)
Widens the area that is
captured by the camera.
Tele (right)
Enlarges the subject.
If you continue to press _, the camera
automatically switches from Optical Zoom to Intelligent Zoom and
stops at the point where the zoom switches to Digital Zoom.
Once the button is released and pressed again, the camera switches
to digital zoom.
If the Digital Zoom is set to off on the menu, the Optical Zoom and the
Intelligent Zoom ranges are available for use. The zoom ratio of the
intelligent zoom changes depending on the number of recorded pixels.
The zoom bar is displayed as follows.
Zoom in with some degree of image
Zoom in with high image quality, deterioration.
Optical zoom range*l Intelligent Digital Zoom
Zoom range*2 range
"1 You can zoom in to a maximum of 5x optically.
*2 The Intelligent Zoom range differs depending on the recorded
pixels. See the following table.
To Next Page
Loading...
Need help?
General
