h
The display changes in the following sequence each time you press the
OK/DISPLAY button: "Normal Display", "Histogram + Info", "No Info",
"LCD Off".
• All the camera buttons function as normal even when the LCD is off.
Press the shutter release button to take pictures as normal.
• z_ appears if you press the shutter release button halfway when
camera shake is likely to occur. To prevent the camera from shaking,
use a tripod, a remote controller (optional) and/or the self-timer
function (p.103, p.106).
• You cannot turn off the LCD in F_q(Frame Composite), _'._(Pet) and
Ilmll (Digital Panorama ) mode.
• You cannot change the information on the display by pressing the OK/
DISPLAY button in O (Green) mode or _I_ (Digital Wide) mode.
• In _ (Digital Microscope) mode. the OK/DISPLAY button only
switches between the Normal display and the No Info display.
Normal Display Histogram + Info
LCD Off No Info
To Next Page
Loading...
Need help?
General
