39
1
Getting Started
9 Press the 4 button.
The camera is ready to take pictures. If you set the date and time from
the [u Setting] menu, the screen will return to the menu. Press the 4
button again.
When the Initial Setting or Date Adjust screen is displayed, you can
cancel the setting operation and switch to Capture mode by pressing
the 3 button. In this case, the Initial Setting screen will appear
next time you turn the camera on.
• When you finish the settings and press the 4 button, the camera
clock is reset to 00 seconds. To set the exact time, press the 4
button when the time signal (on the TV, radio, etc.) reaches 00
seconds.
• You can change the language and date and time settings with the
menu operations. (1p.150, p.157)
To Next Page
Loading...
