68
4
Taking Pictures
F
You can take a number of images and join them together to form a
panorama picture. The panorama software (ACDSee for PENTAX, ACD
photostitcher) on the CD-ROM (S-SW30) supplied with the camera and
a computer are necessary for joining the images. The Panorama Assist
mode enables you to overlap the edges of the images so that they are
easier to join together later into a panorama picture.
1 Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2 Use the four-way controller (2345) to select F
(Panorama Assist).
3 Press the 4 button.
4 Use the four-way controller to
choose the direction in which the
images will be joined.
4 : Joins the images at the left.
5 : Joins the images at the right.
2 : Joins the images at the top.
3 : Joins the images at the bottom.
The example shows the images when 5 is selected.
Taking Panorama Pictures
(Panorama Assist mode)
5, 6
1, 2, 4, 6
3
Set shift direction
Set shift direction
To Next Page
Loading...
Need help?
General
