Pentax X-5 - Compensating Flash Output; Compensating for Brightness (D-Range Setting)

98
3
Taking Pictures
You can adjust the flash output.
1 Use the four-way controller (23) to select [Flash Exp.
Comp.] in the [A Rec. Mode] menu.
2 Use the four-way controller (45) to select the
exposure.
To brighten, select a positive (+) value. To darken, select a negative
(–) value.
You can choose the exposure value in the range of –2.0 EV to +2.0 EV
in increments of 1/3 EV.
Expands the dynamic range and prevents bright and dark areas from
occurring. [Highlight Correction] adjusts the bright areas when the image
is too bright and [Shadow Correction] adjusts the dark areas when the
image is too dark.
1 Use the four-way controller (23) to select [D-Range
Setting] in the [A Rec. Mode] menu.
2 Press the four-way controller (5).
The [D-Range Setting] screen appears.
3 Use the four-way controller (23) to select [Highlight
Correction] or [Shadow Correction].
4 Use the four-way controller (45) to select O (On) or P
(Off).
The D-Range Setting icon appears on the
display.
Compensating Flash Output
Compensating for Brightness (D-Range Setting)
P
When [Highlight Correction] is set to O
Q
When [Shadow Correction] is set to O
O
When [Highlight Correction] and [Shadow
Correction] are both set to O
14:25
1 4 :2 5
14:25
38
3 8
38
09/09/2012
0 9 /0 9 / 2 01 2
09/09/2012