Pentax X-5 - To Divide a Movie

153
5
Editing and Printing Images
Frames downloaded from the PENTAX website or other source can be
used for adding a frame to pictures.
You can extract a frame from the recorded movie to save as a still
picture, divide a movie into two, or add a title picture to a movie.
1 In Q mode, use the four-way controller (45) to
choose the movie you want to edit.
2 Use the four-way controller (2345) to select [
(Movie Edit) from the Playback Mode Palette.
3 Press the 4 button.
The movie editing selection screen
appears.
Subsequent steps vary depending on your
selection.
4 Select [Save as Still Image] on the movie editing
selection screen.
5 Press the 4 button.
The screen for selecting a frame to be saved as a still picture appears.
To Use a New Frame
• Extract the downloaded frame and copy it to the FRAME folder in the
built-in memory or on the SD Memory Card.
• The FRAME folder is created when the SD Memory Card is formatted
with this camera.
• For more information on downloading, refer to the PENTAX website.
Editing Movies
To Save a Frame from a Movie as a Still Picture
OK
O K
OK
Save as Still Image
D i vi d e Mo v i e s
Divide Movies
C a nc e l
Cancel
A d di n g ti t l e p i c t ur e
Adding title picture