3
• Do not disassemble or modify the AC adapter. This can cause a fire or
electric shock.
• If the generation of smoke or strange odor from the AC adapter or other
abnormality occurs, immediately discontinue use and consult a PENTAX
Service Center. Continuing to use the adapter can cause a fire or electric
shock.
• If water should happen to get inside the AC adapter, consult a PENTAX
Service Center. Continuing to use the adapter can cause a fire or electric
shock.
• If you see a lightning flash or hear thunder during use of the AC adapter,
unplug the power plug and discontinue use. Continuing to use the adapter
can cause damage to the equipment, fire, or electric shock.
• Wipe off the plug of the AC adapter if it becomes covered with dust.
Accumulated dust on the plug may cause a fire.
Caution
• Do not place or drop heavy objects on or forcefully bend the AC plug cord.
Doing so may damage the cord. Should the cord be damaged, consult a
PENTAX Service Center.
• Do not touch or short-circuit the terminal area of the AC plug cord while the
cord is plugged in.
• Do not handle the power plug with wet hands. This can cause an electric
shock.
• Do not drop the AC adapter, or subject it to violent impact. This can cause
equipment breakdown.
• To reduce the risk of hazards, use only a CSA/UL certified power supply
cord set, cord is Type SPT-2 or heavier, minimum NO.18 AWG copper,
one end with a molded-on male attachment plug cap (with a specified
NEMA configuration), and the other is provided with a molded-on female
connector body (with a specified IEC non-industrial type configuration) or
the equivalent.
Warning
• Be sure to store the batteries out of the reach of small children. Placing the
battery in their mouths may cause an electric shock.
About the Batteries
To Next Page
Loading...
Need help?
General
Weight and Dimensions
