Pentax X-5 - Battery Level Indicator; Using the AC Adapter

30
1
Getting Started
Powering the Camera
Install the batteries into the camera. Use four AA alkaline, AA lithium or
AA Ni-MH batteries.
1 Open the battery/card cover.
1 Slide the battery/card cover lock lever in the direction of the arrow
to unlock.
2 Slide the battery/card cover in the direction of the arrow to open the
cover.
2 Insert the batteries according to the (+)/(–) indicators in
the battery compartment.
Installing the Batteries
Make sure to check the direction of the batteries. If the batteries are
incorrectly oriented, the power of the camera is not turned on, and
malfunction may result.
Battery/card
cover lock lever
Battery/card cover