135
4
Playing Back and Deleting Images
3
Connect the other ends of the AV cable to the video
input terminal and audio input terminal of the AV
equipment.
When using stereo sound equipment, insert the sound terminal into the
L (white) terminal.
4
Turn the AV equipment on.
When the equipment that the camera is connected to and the equipment
that plays back images are different, turn both on.
When viewing images on AV equipment with multiple video input
terminals (such as a TV), refer to the operation manual of the
equipment
and select the video input terminal to which the camera is
connected.
5
Turn the camera on.
• The video output format differs depending on the region. When you set
[Select Time] in the World Time setting (p.166) to X (Destination), the
video output setting changes to the video output format for that city.
• Depending on the country or region, images and sounds may fail to be
played back if the video output format is set differently from the one in
use there. If this happens, change the video output format setting
(p.173).
• The camera display turns off and the volume cannot be adjusted by
turning the zoom lever while the camera is connected to AV
equipment.
When connecting to and playing back images on AV equipment, image
data is output at normal screen resolution. To view movies recorded at
b, a or M in HDTV, transfer the data to a computer and play it back
on the computer (p.184).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
