Pentax X-5 - Using the Time-Lapse Movie Function

112
3
Taking Pictures
1 Press the Movie button.
Recording starts.
2 Press the Movie button.
Recording stops.
You can capture frames for fast motion playback.
1 Use the four-way controller (45) to select [ c Time-
Lapse Movie] from the Movie Mode Palette.
2 Press the 4 button.
The camera returns to capture status.
3 Press the shutter release button fully.
Recording starts.
The maximum length of continuous recording time for Time-Lapse
Movie is 25 minutes.
4 Press the shutter release button fully.
Recording stops.
• When recording starts using the Movie button, the number of recorded
pixels is fixed to 1920 × 1080 and the frame rate 30fps.
• The recorded area of a movie becomes smaller, both horizontally and
vertically, than the image displayed on the monitor display before
recording.
Using the Time-Lapse Movie Function
• The number of recorded pixels is fixed to 640 × 480 and the frame rate
15fps.
• Zoom is not available during recording.