USER MANUAL
Peplink Balance Series
17.3.4 RADIUS Server Settings
When 802.1X or WPA/WPA2 – Enterprise is selected as the wireless security protocol, RADIUS Server
settings will be available as shown below.
Host
RADIUS server specified by this setting will be used for authentication and accounting.
Secret
This is the secret for accessing the RADIUS server.
Authentication Port
This specifies the UDP port number for the Authentication port of the RADIUS server.
default, it is set as 1812.
Accounting Port
This specifies the UDP port number for the Accounting port of the RADIUSserver.By
default, it is set as 1813.
http://www.peplink.com -127 / 207 - Copyright © 2013 Peplink
To Next Page
Loading...
Need help?
General
