peplink 1350 User Manual

USER MANUAL
Peplink Balance Series
Beacon Rate
This setting provides the option to send beacon in different transmit bit rate and the bit
rates are: 1Mbps, 2Mbps, 5.5Mbps, 6Mbps, 11Mbps.
Beacon Interval
This setting provides the option to set the time between each beacon send. Available
options are: 100ms, 250ms and 500ms.
DTIM
This setting provides the option to set the frequency for beacon to include Delivery Traffic
Indication Message, DTIM. The interval unit is in millisecond.
RTS Threshold
This setting provides the option to set the minimum packet size for the unit to send an
RTS using the RTS/CTS handshake. Setting zero would disable this feature.
Slot Time
This setting provides the option to modify the unit wait time before it transmits. The
default value is 9μs.
ACK Timeout
This setting provides the option to set the wait time to receive acknowledgement packet
before doing retransmission. The default value is 48μs.
Frame Aggregation
With this feature enabled, throughput will be increased by sending two or more data
frames in a single transmission.
Frame Length
This option is only available when Frame Aggregation is enabled. It specifies the frame
length for frame aggregation. By default, it is set as 50000.
Web Administration Settings
Enable
Check the box to allow Peplink Balance to manage the web admin access information of
the Pepwave AP One.
Web Access Protocol
This option specifies the web access protocol used for accessing the web admin of
Pepwave AP One. The two available options are HTTP and HTTPS.
Management Port
This is to specify the management port used for accessing the device.
HTTP to HTTPS
Redirection
This option will be available if you have chosen HTTPS as the Web Access Protocol.
With this enabled, any HTTP access to the web admin will be redirect to HTTPS
automatically.
Admin User Name
This specifies the administrator username of the web admin. It is set as admin by default.
Admin Password
This field allows you to specify a new administrator password. You may also click the
Generate button and let the system generate a random password automatically.
http://www.peplink.com -137 / 207 - Copyright © 2013 Peplink

peplink 1350 Specifications

General

Brand	peplink
Model	1350
Category	Network Router
Language	English