USER MANUAL
Peplink Balance Series
To configure, navigate to Network >SpeedFusion
TM
>New Profile
This will open a page similar to the one as shown below
A list of definedSpeedFusion
TM
Connection profiles and Link Failure Detection Time option will be
shown. Click the New Profile button to create a new VPN connection profile for making VPN connection
to a remote Peplink Balance via the available WAN connections.Each profile is for making VPN
connection with one remote Peplink Balance
http://www.peplink.com -75 / 207 - Copyright © 2013 Peplink
To Next Page
Loading...
Need help?
General
