USER MANUAL
Peplink Balance Series
IPsec VPN Settings
This field is for specifying a local name to represent this connection profile.
Active
When this box is checked, this IPsec VPN connection profile will be enabled. Otherwise, it
will be disabled.
Remote
Gateway IP
Address
Enter the remote peer’s public IP address.For Aggressive Mode, this is optional.
Local Networks
Enter the local LAN subnets here. If you have defined “static routes”, they will be shown
here too.
http://www.peplink.com -82 / 207 - Copyright © 2013 Peplink
To Next Page
Loading...
