peplink 310 User Manual

USER MANUAL
Peplink Balance Series
6.4 Peplink Balance 310
6.4.1 Front Panel Appearance
6.4.2 LED Indicators
The statuses indicated by the Front Panel LEDs are as follows:
Power and Status Indicators
Power
OFF – Power off
Green – Power on
Status
OFF – Upgrading firmware
Red – Booting up or busy
Blinking red– Boot up error
Green – Ready
LAN and WAN Ports
Green LED
ON – 10 / 100 / 1000 Mbps
Orange LED
Blinking – Data is transferring
OFF – No data is being transferred or port is not connected
Port Type
Auto MDI/MDI-X ports
USB Port
USB Ports
For connecting a 4G/3G USB modem.
Reset Button
Power LED
Status LED
LAN Ports
WAN Ports
USB
http://www.peplink.com -21 / 207 - Copyright © 2013 Peplink

peplink 310 Specifications

General

Load Balancing	Yes
VPN Support	Yes
Power over Ethernet (PoE)	No
LAN Ports	4
Power Input	12V DC
Cellular Connectivity	Optional
Operating Temperature	0°C to 40°C