peplink Pepwave AP One Series

LED Indicators
Status
RED
Access point initializing
Blinking Red
Boot up or error
GREEN
Access point ready
LAN
Green LED
ON – Powered-on device connected to Ethernet port or 1000Mbps
OFF – 10Mbps / 100Mbps or No device connected to Ethernet port
Orange LED
ON – Port is connected without traffic
BLINKING – Ethernet port sending/receiving data
OFF – No data is being transferred or No device connected to Ethernet port
Port Type
Auto MDI/MDI-X ports
WAN
Green LED
ON – Powered-on device connected to Ethernet port or 1000Mbps
OFF – 10Mbps / 100Mbps or No device connected to Ethernet port
Orange LED
ON – Port is connected without traffic
BLINKING – Ethernet port sending/receiving data
OFF – No data is being transferred or No device connected to Ethernet port
Port Type
Auto MDI/MDI-X ports
Green LED
ON – Powered-on device connected to Ethernet port
OFF – No device connected to Ethernet port
Number of connected clients – SignalBar1: WiFi AP client count > 0
SignalBar2: WiFi AP client count > 10
SignalBar3: WiFi AP client count > 20
https://www.peplink.com
10
Copyright @ 2020 Pepwave