peplink Pepwave AP One Series User Manual

protocol, and interface. To perform a search, navigate to Status > Active Sessions > Search.
This Active Sessions section displays the active inbound/outbound sessions of each WAN
connection on the Pepwave router. A filter is available to sort active session information. Enter a
keyword in the field or check the box of one of the WAN connections to filter your search.
https://www.peplink.com
89
Copyright @ 2020 Pepwave

peplink Pepwave AP One Series Specifications

General

Brand	peplink
Model	Pepwave AP One Series
Category	Wireless Access Point
Language	English

Summary

Hardware Overview

Installation

Installation Procedures

Step-by-step guide on connecting and powering up the access point.

Dashboard

Network

WAN

Configuration for WAN connection details to connect to the Internet.

LAN

Configuration of LAN interface settings, including IP and DHCP settings.

PepVPN

Securely connect remote sites to the access point using PepVPN.

Inbound Access

Define port forwarding rules to allow inbound access from the Internet.

NAT Mapping

Configure IP address mapping for inbound and outbound NAT'd traffic.

AP Tab

AP

Controls for wireless SSID, AP settings, Mesh, and WDS.

Wireless SSID

Status

System Tab

Admin Security

Configure user access, passwords, and network access settings.

Operating Mode

Select the device's operating mode: Router, Bridge, or Bridge without LAN.

Firmware

Process for upgrading the access point's firmware online or manually.

Configuration

Tools

Status Tab

Device

Displays system information, model, firmware, uptime, and MAC address.

Active Session

Client List

Usage Reports

Restoring Factory Defaults