peplink Pepwave MAX BR1 MK2

Dynamic DNS Settings
Service Provider
This setting specifies the dynamic DNS service provider to be used for the
WAN. Supported providers are:
● changeip.com
● dyndns.org
● no-ip.org
● tzo.com
● DNS-O-Matic
Select Disabled to disable this feature.
User ID / User /
Email
This setting specifies the registered user name for the dynamic DNS service.
Password / Pass /
TZO Key
This setting specifies the password for the dynamic DNS service.
Update All Hosts
Check this box to automatically update all hosts.
Hosts / Domain
This setting specifies a list of hostnames or domains to be associated with the
public Internet IP address of the WAN connection.
Important Note
In order to use dynamic DNS services, appropriate hostname registration(s), as well as a valid account
with a supported dynamic DNS service provider, are required.
A dynamic DNS update is performed whenever a WAN’s IP address is changed, such as when an IP is
changed after a DHCP IP refresh or reconnection.
Due to dynamic DNS service providers’ policies, a dynamic DNS host expires automatically when the
host record has not been not updated for a long time. Therefore, the Pepwave MAX performs an update
every 23 days, even if a WAN’s IP address did not change.
https://www.peplink.com
131
Copyright @ 2021 Pepwave