26.5 Email Notification
Email notification functionality provides a system administrator with up-to-date information on
network status. The settings for configuring email notifications are found at System>Email
Notification.
Email Notification Settings
This setting specifies whether or not to enable email notification. If Enable is
checked, the Pepwave router will send email messages to system administrators
when the WAN status changes or when new firmware is available. If Enable is not
checked, email notification is disabled and the Pepwave router will not send email
messages.
This setting specifies the SMTP server to be used for sending email. If the server
requires authentication, check Require authentication.
This setting specifies via a drop-down menu one of the following valid Connection
Security:
● None
● STARTTLS
● SSL/TLS
This field is for specifying the SMTP port number. By default, this is set to 25. If
Connection Security is selected “STARTTLS”, the default port number will be set
to 587. If Connection Security is selected “SSL/TLS”, the default port number will
be set to 465.
You may customize the port number by editing this field.
To Next Page
Loading...
