peplink Pepwave MAX BR1 MK2

2.14 MAX HD2/4 MBX (CAT-18)
2.14.1 Panel Appearance
2.14.2 LED Indicators
The statuses indicated by the front panel LEDs are as follows:
Status Indicators
Status
OFF
System initializing
Red
Booting up or busy
Blinking red
Boot up error
Green
Ready
Wi-Fi AP and Wi-Fi WAN Indicators
Wi-Fi WAN /
Cellular 1 /
Cellular 2
OFF
Disabled Intermittent
Blinking slowly
Connecting to network(s)
Blinking
Connected to network(s) with traffic
ON
Connected to network(s) without traffic
https://www.peplink.com
36
Copyright @ 2021 Pepwave