peplink Pepwave MAX BR1 MK2

2.26 MAX BR1 IP55
2.26.1 Panel Appearance
2.26.2 LED Indicators
The statuses indicated by the front panel LEDs are as follows:
Status Indicators
Status
OFF
System initializing
Red
Booting up or busy
Blinking red
Boot up error
Green
Ready
LAN and Ethernet WAN Ports
Green LED
ON
1000Mbps
OFF
10 Mbps / 100 Mbps or port is not connected
Orange LED
ON
Port is connected without traffic
Blinking
Data is transferring
OFF
Port is not connected
Port Type
Auto MDI/MDI-X ports
https://www.peplink.com
53
Copyright @ 2021 Pepwave