Pepperl+Fuchs KFD Series - Connecting with the Device

2018-04
38
HART Multiplexer System KFD*-HM*-16
Configuration
6.4 Connecting with the Device
Connecting the Computer to the Device
1. Mount the device. See chapter 4.
2. Connect the device to the power supply.
3. Connect the computer and the device via an interface converter. See chapter 4.4.3.
4. Start PACTware as described in the manual "Installation and Configuration
Device Type Manager (DTM)".
The PACTware main window is displayed. See chapter 6.3.
Enabling Memory-Optimized Operation
In combination with the DTMs for the multiplexer master, we recommend enabling
the Memory-optimized operation option.
1. Open the menu Extras > Options.
2. Enable Use memory-optimized project management.
3. Confirm your selection with OK.
You have enabled the memory-optimized operation.