HART Multiplexer System KFD*-HM*-16
Operation
2018-04
67
7.2.2 Field Device List
Selecting the Field Device List
1. Use the mouse to double-click the multiplexer master KFD2-HMM-16 in
the project window.
2. In the editing window, open the Related tasks > Connected field devices menu.
The Connected field devices window is displayed.
In the Connected field devices window, a table detailing information on the field devices
connected to the multiplexer master is shown:
Table column Explanation
Modules Module to which the field device is connected
Loop Signal loop in which the field device is connected
Polling address Polling address of the field device
Unique ID Unique, unchanging address of the field device
Device type Device type
Manufacturer Manufacturer of the field device
HART revision HART revision under which the field device is operated
Long tag Long device tag of the field device
Tag Tag for identification of the field device
Descriptor Description for the field device
Date Date of the last change to the identification information
Message Any user-created message/comment
Table 7.1 Explanation of the field device list
To Next Page
Loading...