Pepwave MAX BR1 Mini User Manual

Pepwave MAX and Surf User Manual
http://www.pepwave.com 105 Copyright @ 2016 Pepwave
15.2.1 Algorithm: Weighted Balance
T
his setting specifies the ratio of WAN connection usage to be applied on the specified
IP protocol and port. This setting is applicable only when Algorithm is set to Weighted
Balance.
The amount of matching traffic that is distributed to a WAN connection is proportional to
the weight of the WAN connection relative to the total weight. Use the sliders to change
each WAN’s weight.
For example, with the following weight settings:
• Ethernet WAN1: 10
• Ethernet WAN2: 10
• Wi-Fi WAN: 10
• Cellular 1: 10
• Cellular 2: 10
• USB: 10
T
otal weight is 60 = (10 +10 + 10 + 10 + 10 + 10).
Matching traffic distributed to Ethernet WAN1 is 16.7% = (10 / 60 x 100%.
Matching traffic distributed to Ethernet WAN2 is 16.7% = (10 / 60) x 100%.
Matching traffic distributed to Wi-Fi WAN is 16.7% = (10 / 60) x 100%.
Matching traffic distributed to Cellular 1 is 16.7% = (10 / 60) x 100%.
Matching traffic distributed to Cellular 2 is 16.7% = (10 / 60) x 100%.
Matching traffic distributed to USB is 16.7% = (10 / 60) x 100%.

Pepwave MAX BR1 Mini Specifications

General

Brand	Pepwave
Model	MAX BR1 Mini
Category	Wireless Router
Language	English