16
SIDE SHELF ASSEMBLY
A: Assembly the side shelf with 4 pcs of 1/4” X 10mm truss head screws, 4 pcs of 1/4’’ flat
washers and 4 pcs of 1/4’’ split locks (Pack D) to the left panel.
B: Assembly the side burner with 4 pcs of 1/4” X 10mm truss head screws, 4 pcs of 1/4’’flat
washers and 4 pcs of 1/4’’split locks (Pack D) to the right panel.
C: Use 6 pcs of 5/32” X 10mm (Pack A) flat screwS to tighten the side shelf and
side burner shelf as shown figure below.
A
B
C
Pack A
Pack D
To Next Page
Loading...
