Refer to Figures 46-60.
DESCRIPTION
The PERFORMAX 10”Model Number 240-3605 table saw offers precise cutting performance for all woods up to 3-1/2” (89 mm)
thick. The 10” Table Saw is recommended for use with a 10” blade.
The saw features a right extension table with ripping capacity of 30” (762 mm). Saw body has on board storage for push stick,
miter gauge, rip fence and saw blades and blade wrenches. Saw is equipped with a riving knife and a clear acrylic blade guard
with anti-kickback feature. Cabinet is constructed of plastic and includes a dust extraction port.
Rip Fence Assembly features a precision rip fence that is designed for simple and one-hand maneuverability. Front rail is
calibrated in inches. Foldable Leg Stand with wheels features an easy transport and storage.
WARNING: Disconnect power before attempting any of the following procedures. Be certain switch is in OFF position and
the key is removed. Saw blade must not be moving. Saw blade will rotate freely after motor is turned off. Allow blade to come to a
complete stop before attempting any of the following procedures.
WARNING: The operation of any power tool can result in foreign objects being thrown into the eyes, which can result in
severe eye damage. Always wear safety goggles complying with United States ANSI Z87.1 before commencing power tool
operation.
WARNING: Do not allow familiarity with a tool to make you careless. Remember that a fraction of a second of carelessness
is sufficient to cause serious injury.
WARNING: Do not use any attachments or accessories that are not recommended by the manufacturer of this tool. The
use of attachments or accessories that are not recommended can result in serious personal injury.
WARNING: Although many of the illustrations in this Operator’s Manual are shown with the blade guard removed for clarity,
do not operate the saw with-out the blade guard unless specifically instructed to do so.
WARNING: The table saw must be mounted to a firm, supporting, waist high surface, such as a workbench or leg stand.
Many illustrations in this Operator’s Manual are shown with the saw unmounted for clarity.
APPLICATIONS
You can use this tool for the purposes listed below:
• Straight-line cutting operations, such as crosscutting, ripping, mitering, beveling, and compound cutting.
• Cabinet making and woodworking
NOTE: This table saw is designed to cut wood and wood composition products only.
BASIC OPERATION OF THE TABLE SAW
The 3-pronged plug must be plugged into a matching outlet that is properly installed and grounded in compliance with all local
codes and ordinances. Improper connection of the equipment can result in electric shock. Check
with an electrician or service
technician if you are unsure about proper grounding. Do not alter the plug. If it will not fit into the outlet, have the proper outlet
installed by a qualified electrician.
OPERATION
_ 32 _
To Next Page