09931286E
28
11. Insert blank solutions into the both reference and sample cell holder. Select Baseline (or Zero) and
then baseline (or zero) will be measured when it reaches the set Temperature.
NOTE:
To monitor the probe temperature, the probes should be immersed in the sample, or to use the block
temperature for monitoring, the cell lid should be closed tightly.
a. Start Temp (°C): The starting temperature of experiment.
b. SP Temp (°C): The set temperature to go to the next measurement temp.
c. Block Temp (°C): The temperature of Cell Block.
d. Probe 1 Temp (°C): The temperature of Probe 1.
e. Probe 2 Temp (°C): The temperature of Probe 2.
f. Monitor: Selected temperature is being monitored.
g. Error Range (°C):
To Next Page
Loading...
