09931286E
29
It shows the temperature tolerance between the sampling and monitored temperature. The
measurement will start when the temperature tolerance reaches within the set Error
Range.
h. Hold Time: It shows the set holding time.
i. Elapsed Time (s): It shows the elapsed time to reach the sampling temperature.
j. Status: It shows the status of experimental progress.
12. Remove blank solution from sample cell holder and insert sample solution into the sample cell holder.
Select Sample, then the measurement will be started after the temperature reached the target
temperature.
NOTE:
To pull out the cell easily, use the cell lifting knob.
Figure 24 Pull out the cell
13. After the measurement is finished, the results are displayed in the result window. Save or print
results as required.
To Next Page
Loading...
